Pro-Connect Pvc Female Combination Tee - 3/4 Inch (Ins X Ins X Fpt)

Model # INS-1402-007|Store SKU # 1000123341

Overview

Model # INS-1402-007 Store SKU # 1000123341

Joins two 3/4 Inch Pieces of Poly Pipe to 3/4 Inch Male Threaded Pipe to form a tee. NSF Approved. Safe for Potable Water. Good Chemical Resistance. Not affected by Ultraviolet Light. Widely used in irrigation systems where lines are not below the frost line. Temperature Rating 73 F - Cold Water Applications.

Joins two pieces of Poly Pipe to Male Threaded Pipe to form tee.

Quick and easy connections requiring no special tools

Specifications

Connection Method

Threaded

Fitting or Connector Type

Tee

Application

Potable Water

Dimensions

Assembled Depth (in inches): 4.45
Assembled Height (in inches): 1.69
Assembled Weight (in lbs): 0.09
Assembled Width (in inches): 1.42
Packaged Depth (in inches): 4.45
Packaged Height (in inches): 1.69
Packaged Weight (In lbs): 0.09
Packaged Width (in inches): 1.42

Details

Application: Potable Water
Connection Method: Threaded
Fitting or Connector Type: Tee
Fitting Size(in.): 3/4
Pack Size: 1
Use With: Clean Water

Warranty / Certifications

1-888-838-8801

Related Products

IPEX RadonX Soil Gas Vent 4 inch PVC Tee Wye - H

RadonX is the first PVC piping solution that is specifically designed, tested and labeled to address the need for collecting and venting soil gas from the sub slab area to help reduce indoor radon levels. Focusing on low-rise construction, RadonX is designed to maximize system integrity offering compatible pipes, fittings, solvent cement and accessories. RadonX pipe and fittings are designed and tested as a system by IPEX Inc.

View Details

Waterline 3/4 InchX1/2 InchX3/4 Inch Barb Tee

3/4 Inch X 1/2 Inch X 3/4 Inch Barb Tee is intended for potable water distribution systems. It is made of forged brass which is 15% stronger than brass counterparts and are free of imperfections. This adapter is high quality as it is certified by the Canadian Standard for Pex Pipe and Fittings, as it has passed pressure testing at three temperatures. It has a maximum working pressure of 690kPa at 82C.

View Details

Waterline 3/4 Inch Pex Tee

3/4" pex tee is intended for potable water distribution systems. it is made from forged brass, making it approximately 15% stronger than brass counterparts and are virtually free of imperfections. this tee is high quality as it is certified by the Canadian standard for pex pipe and fittings, as it has passed pressure testing at three temperatures. it has a maximum working pressure of 690kpa at 820c.

View Details

IPEX 4 Inch x 4 inch x 4 inch PVC Sewer Straight Tee - H

IPEX PVC-BDS pipe and fittings for Building-Drain-Sewer Applications. This sharp 90-degree tee is also known as a vent tee and is designed to be part of the PVC drain venting system. Do not install as part of the drainage system. PVC fittings are durable and long lasting.

View Details