Ice Salt Melters & Traction Control(54 products)

WarmlyYours Remote Manual Override Device (Compatible With SCP_120) for Snow Melting Systems

WarmlyYours RCO Remote Control Override provides a convenient and economical means of monitoring and controlling snow melting or roof and gutter deicing systems from a remote, indoor location. The manual override allows for greater user control. Featuring a 2-conductor hook up, the Remote Control Override can be installed up to 500 from the control panel. Affordable and easy to install, it can be either flush or surface mounted to accommodate the requirements of your indoor installation. For use with SCP-120 or SCA-120-2SS controls.

WarmlyYours Snow Melt Control Economy, 120V (Need SLAB_SS To Operate)

The SCE-120 provides for economical, automatic operation of snow melting or roof and gutter de-icing systems. Featuring a UL Listed, wall-mounted metal enclosure, the SCE-120 enables detection of temperature and moisture. For use with SCE-AMB-SS and SCE-GTM-SS sensors, this affordable control option is easy to program and includes a digital interface and maximum 2 sensor capability. The SCE-120 is CSA Certified for use in Canada and the U.S.

Gardenised Heavy Duty Snow Rolling Remover with Wheels and Wide Blade, Red

The deep blade moves large quantities of snow in only a few passes. It's the ideal tool for large areas of snow removal. Sled shovel for heavy snowfall, no tool is faster or easier to use to move large amounts of snow Designed with an ergonomic handle to better protect your posture and reduce back strain large poly blade allows for maximum coverage in minimum time. Coated steel handle is durable when moving heavy amounts of snow steel wear strip helps clear surfaces.

WarmlyYours Pipe Anti-Freeze 80 ft Black Cable Kit

A burst water pipe in the dead of winter can be a huge inconvenience and completely replacing the insulation needed to prevent pipes in perimeter walls and crawlspaces from freezing can be cost-prohibitive. To keep your most vulnerable pipes from freezing, the simple and DIY-friendly solution is to install a PRO-Tect heating cable for pipes. This 120 V plug-in heating cable generates heat (7 watts per linear foot) which will keep your pipes from freezing in low temperatures. The integrated thermostat control, located between the non-heating lead cable and the heating wire itself, will ensure a consistent temperature while minimizing energy use. The thermostat turns the heating cable on when exposed to temperatures below 37.4°F (3°C). It will shut the heating cable off when the pipe has been heated to a temperature of approximately 50°F (10°C). The cable is covered by a 2-year warranty.