Model # RE914|Store SKU # 1000114158
Ditra-PS is a peel and stick uncoupling membrane designed for ceramic and stone tile installations on floors. It features a pressure-sensitive adhesive eliminating the need for thin-set to install the membrane. The peel and stick version provides the same uncoupling, load distribution, waterproofing and vapor management functions as the original Ditra. Ditra-PS can be installed over a variety of substrates such as concrete, plywood, and OSB. Use Schluter-Primer-PS to prime the subfloor prior to installing Ditra-PS to create a uniform layer and a stronger bond. Ditra-PS is available in rolls or sheets.
DMX Tile Membrane isolates movement in the subfloor which minimizes cracks in your tiles. DMX Tile Membrane meets and exceeds all tests set by the Tile Council of North America (TCNA). Our unique flared dimple design locks in the thinset to provide a secure base for the tiles. DMX Tile Membrane includes a roll of Vapor Band (Waterproof Seam Tape) at NO extra charge, which properly waterproofs the seams, improving the quality of your tile project. DMX Tile Membrane installs up to 50% faster than competitive membranes because our dimples are round, they have no corners, and therefore do not develop air pockets that can compromise your installation. DMX Tile Membrane is ICC approved (Approval No. ESR 5344) and passes the Robinson Test (ASTM C627-18) under "Extra Heavy" load conditions. Compare our value proposition to any competitor and you will see that we offer you better quality and higher value than anyone else. DMX Tile Membrane... The Best Choice for your tile projects.
PROVA-MAT is a versatile, low perm waterproof membrane that is ideal for use in wet areas, such as showers, bathrooms, laundry rooms, backsplashes, countertops and more. The new PROVA-MAT now comes with North America's preferred imperial system Gridlines measured in inches! Installers can now save time and enjoy precision measurement and dependable waterproofing with PROVA-MAT and waterproofing accessories. Additional PROVA-MAT waterproofing accessories include: PROVA CORNERS (inside & outside), PROVA PIPE SEAL, and PROVA JOINT. To create your fail-proof, waterproof seal with PROVA MAT, simply treat the joints and seams first and then cover the larger sections. Enjoy consistently even surface for successful tile application.
Mapelastic WaterStop is a flexible, thin, fast-drying, one-component, liquid-rubber waterproofing and crack isolationmembrane for installation under ceramic tile or stone in residential, commercial and industrialenvironments. It provides a continuous barrier to protect adjacent floors and rooms below from water damage. Mapelastic WaterStop also prevents in-plane floor cracks up to 1/8-inch (3 mm) from transmitting through tile or stone. In problem areas such as coves, corners, cracks and drains, it can be combined with MAPEIs optional Reinforcing Fabric or Mapeband accessories (cove roll and drain flashing) to provide additional protection.
