BrassCraft Stem Assembly

Prime-Line Single 1-1/4 in. Steel Roller Assembly, Ball Bearing, Diecast Plain Back

This is an adjustable diecast plain back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller used primarily by Canadian Patio Door Manufacturers. It's plain back diecast housing is 1/2 in. wide, 1 in. tall and 1-9/16 in. long. There is a 10-32 threaded mounting hole in the back end as well as on to top of the housing. There is an adjustment screw in the back end.

Prime-Line 1-1/4 in. Steel Ball Bearing Sliding Door Tandem Roller Assembly, Milgard

This is a plain back tandem roller assembly with two 1-1/4 in. concave steel ball bearing rollers. The stamped steel housing is adjustable. Used by Milgard as well as a variety of other vinyl patio door manufacturers. The housing is 3/4 in. wide and 1 in. tall and 3-1/8 in. long with a threaded mounting hole on the back end and an optional use threaded hole on the top.

Prime-Line Single 1-1/4 in. Steel Roller Assembly, Diecast Unique Housing

This is a diecast unique back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller used by a variety of patio door manufacturers. It's diecast housing is a cross between the Unique or the Plain Back styles. It is 11/16 in. wide with a flare width of 3/4 in., 1-5/32 in. tall and 2-11/16 in. long and an adjustment screw in the back end. There is a 1/4-20 threaded mounting hole in the back end and a 10-32 threaded mounting hole on the top.

Prime-Line Steel Sliding Door Roller Tandem Assembly, 1-1/4 Inches D x 5/16 Inches W, Steel, Yellow Zinc (Single Pack)

Replace or repair broken or missing sliding door rollers with the Prime-Line D 1607 Sliding Door Wheels Assembly. This adjustable tandem patio door rollers replacement is used by a variety of patio door manufacturers. Made of stamped steel housing with concave steel ball bearing rollers in a yellow zinc finish, these patio door replacement wheels are strong, durable, and built to last. The housing of the sliding door rollers replacement is. A Phillips head screwdriver is required for installation and height adjustment of this roller assembly sliding door. The housing measures 11/16 inch wide, 1-3/16 inch tall, and 4-5/8 inch long. The wheel is 5/16 inch thick by 1-1/4 inches tall. The assembly comes with a minimum collapsed height of 1-1/2 inch. Please refer to the line art drawing for dimensions and compare with your needs before purchasing.