Refresh For Less event is on now. Don't wait!  Shop Event
Choose Your Options

Overview

Model # FL001-PLA-D3D-Silver Store SKU # 1001308199

PLA is especially ideal for printing objects with flat surfaces, hard angles and ones requiring tight tolerances for fit. Manufacturing Process: Controlled using Non-Contact Laser Diameter Gauge:10.03 mm Tolerance. Monitored with rapid, reproducible and repeatable measurements to exact dimensional tolerances. Maintaining high consistency of dimensional accuracy Certifications: D3D Filaments are complaint with ROH Certifications: free from any potential hazardous substances including cadmium, mercury and chromium. Technical Specification Printing Temperature : 1900C - 2300C Heated Bed: PLA can be printed with or without a heated print bed, however, if your 3D printer does have a heated bed, it is recommended that you set your bed temperature to approximately 600C. First layer usually 50C-100C higher than subsequent layers. With Glow in the Dark PLA, increasing your print temperature 5 to 100c is recommended. Sticks well to Glass with PVA Glue ,BuildTak, PEI, or blue tape.

  1. 1 kg (2.2 lb) Premium D3D PLA Filament Coil comes with a resealable bag and a desiccant pack.
  1. Material: 100% Grade A Virgin Raw Inego 4043D Materials
  1. Property: Non-Brittle Formula Blend
  1. Manufacturing Process: Controlled using Non-Contact Laser Diameter Gauge:±0.03 mm Tolerance. Monitored with rapid, reproducible and repeatable measurements to exact dimensional tolerances.
  1. Certifications: D3D Filaments are complaint with ROH Certifications: free from any potential hazardous substances including cadmium, mercury and chromium.

Specifications

Dimensions

Assembled Depth (in inches)
7.5
Assembled Height (in inches)
2.75
Assembled Weight (in lbs)
2.2
Assembled Width (in inches)
7.5
Packaged Depth (in inches)
8
Packaged Height (in inches)
3
Packaged Weight (In lbs)
2.8
Packaged Width (in inches)
8

Details

Certified
No
Country of Origin
CN - China

Warranty / Certifications

Item Refundable for 30 days if it is sealed in the vacume bag unless its defective . After 30 days item is not refundable.
3D Printer PLA Filament -SilverD3D 3D Printer PLA Filament -SilverPLA is especially ideal for printing objects with flat surfaces, hard angles and ones requiring tight tolerances for fit. Manufacturing Process: Controlled using Non-Contact Laser Diameter Gauge:10.03 mm Tolerance. Monitored with rapid, reproducible and repeatable measurements to exact dimensional tolerances. Maintaining high consistency of dimensional accuracy Certifications: D3D Filaments are complaint with ROH Certifications: free from any potential hazardous substances including cadmium, mercury and chromium. Technical Specification Printing Temperature : 1900C - 2300C Heated Bed: PLA can be printed with or without a heated print bed, however, if your 3D printer does have a heated bed, it is recommended that you set your bed temperature to approximately 600C. First layer usually 50C-100C higher than subsequent layers. With Glow in the Dark PLA, increasing your print temperature 5 to 100c is recommended. Sticks well to Glass with PVA Glue ,BuildTak, PEI, or blue tape.
D3D
1001308199
CAD29.992025-03-17
The Home Depot Canada
00