Multinautic 2-Section QP-320 16 ft. Long Aluminium Truss Frame Roll-In Stationary Dock Kit with Cedar Decking

Multinautic developed the QP-320 Aluminum Dock Collection to respond to a growing demand for light-duty docks. Premium quality aluminum is up to its well-known stringent quality standards. The structural open truss-frame design has the particularity to let high waves pass through, allowing for 16 ft. spans without posts. This stationary dock is to be installed in a maximum of 4 feet of water. For easy layout planning, there are differently designed packages to select: cedar or polymer decking, some with a 24 in. wheel kit. Choose either your preferred ensemble or separate components. This kit has 2 sections of 4 ft. x 8 ft. frames, totalling 16 feet in length. Posts, base plates and required hardware are included. Includes 2 wheels for easy seasonal install/removal and allows for adjusting to varying water levels. Includes cut-to-size Premium Kiln-dried Western Cedar and screws for a light and durable assembly.

Dock Edge Rolling Dock Wheel, 24in Foamed

Wheels are available in 18 or 24 diameters and up to 1500 lb. capacity per wheel. These tough, rigid wheels offer stress, crack and impact resistance. They roll easily over virtually any terrain and will not rust on the axle. Use for roll-in docks or boat lifts. All wheels accept a 1-7/8 O.D. Axle. See chart below for wheel capacity.

Dock Edge Dock Cleat, 14 inch, Galvanized

These are your traditional, cast iron, hot dip galvanized Dock Cleats. The mounting holes are recessed with a hexagonal shape to stop the head of a carriage bolt from turning. This eliminates the need to use tow wrenches when mounting.

Dock Edge Mooring Snubber, 1/2 inch-3/4 inch, 14-18mm

For secure and cushioned mooring. Ideal for both motor and sailing boats. The forces the line is exposed to, are taken up by the elongation of the mooring snubber, reducing the shock load on the line as well as the boat's hardware.