FIRMAN L5-30P to TT-30R Adapter

Generac 50 Amp DLM Load Management Module

Use Generacs DLM Module in conjunction with the Nexus Smart Switch to intelligently manage additional large loads and enable the efficient use of a smaller generator system. Just like the built-in load shedding capabilities of the Nexus Smart Switch, after the load(s) are shed, they are brought back on individually to ensure generator power availability and eliminate potential system overload.

Reliance Controls THP108 PowerBack Utility Power Return Alert

The PowerBack is intended to be installed on a manual transfer panel or generator-ready load center. During a power outage, when the main breaker has been turned off to allow the generator to provide emergency power to the panel, the PowerBack can be activated and will emit a pulsing 105dB alarm when the power outage ends and utility power is again available. The PowerBack installs in a 1/2 trade size knockout in the panel within 20 in. of one of the utility hot legs. It includes an eight-inch current sensing antennae at the end of a 22 in. jacked lead. When wrapped around one of the hot legs to the main circuit breaker, the antennae will detect the returning utility current and activate the sonic alert.

Kipor Power Equipment 3000W Generator Cover

Kipor GC3 generator cover fits a 3.0 kilowatt generator. This cover is used for putting the generator in storage. Protects the generator from scratches, dirt, water and grease. Made of thick, tough, vinyl coated polyester. There is a convenient pocket to hold all of your generator accessories.

Energizer Remote Control With 20 Feet Cable

This simple switch allow the user to remotely switch ON or OFF the EN900/EN1100/EN1500/EN2000/EN3000/EN4000 series inverter made by Energizer. Allows for simple hookup with one phone jack type connector, there is no cutting and splicing necessary!