K2 Pumps 1/3 HP Cast Iron Sump

Model # SPI03302K|Store SKU # 1001632556

Overview

Model # SPI03302K Store SKU # 1001632556

The K2 Pumps 1/3 HP Sump Pump comes with a Snap Action Switch. The pump is ideal for applications that require a rugged submersible sump pump. The non-clog vortex impeller can handle up to 1/2" solids. The innovative Quick-Connect fitting features a metal ring with teeth that firmly grip PVC pipes, and reduces installation time. The top suction design filters debris and minimizes clogging, reduces airlock. Comes with a 10' power cord.

Durable, heavy-duty Cast Iron construction

Removes water up to 4000 GPH at 0' of lift, with a maximum lift of 26 feet

Metal -guard Snap Action float switch will operate in a 10" or larger diameter basin

Includes a 1-1/2 inch Quick Connect Fitting which eliminates the need for PVC primer, glue or plumber's tape

5 Year Warranty

Specifications

Dimensions

Assembled Depth (in inches): 8.15
Assembled Height (in inches): 12.85
Assembled Weight (in lbs): 29.0
Assembled Width (in inches): 29.0
Packaged Depth (in inches): 11.42
Packaged Height (in inches): 15.75
Packaged Weight (In lbs): 29.04
Packaged Width (in inches): 10.04

Details

Certified
Country of Origin: CN - China
Facilities Maintenance
Length: 12.2

Warranty / Certifications

5 Years

Related Products

Basement Watchdog 1/3 HP Submersible Combination Sump Pump System with 24-hour a Day Monitoring Controller

Easy to install with little or no plumbing knowledge required! This pre-assembled Basement Watchdog Combination Sump Pump System provides both primary and battery backup pumping capabilities, offering complete protection and peace of mind. Pumping up to 3,720 GPH, the HP Cast Iron primary sump pump is both powerful and energy efficient with a permanent split capacitor (PSC) motor that uses only 3.5 amps. This system includes the Basement Watchdog Emergency Battery Backup Sump pump system that provides 24 hour a day monitoring of pump, power, and battery conditions. It will protect your basement from a power outage, primary pump or float failure, and provide extra pumping capacity when needed. The user-friendly controller will sound an alarm, give a visual light, and pinpoint the problem. The battery backup sump pump can run intermittently for days on a single battery charge from any Basement Watchdog Standby Battery.

View Details

Burcam 1/3 HP Rugged Cast Iron Submersible Sump Pump with Automatic Start-Stop Cycle.

Built for residential automatic drainage of basement sump pits, this model replaces upright and submersible pumps and is designed for a permanent installation in a 14" basin and larger. Motor turns on when the water level lift the tethered float switch. Motor turns off when the float switch drops down. Recommended for a residential installation where the dynamic pumping head does not exceed 18'. Maximum flow of 3050 GPH (11525 LPH).

View Details

Burcam 30 x 30 sump basin with lid (Manitoba specifications)

The BURCAM 30 x 30" sump basin and lid complies with Manitoba building codes. The basin is made of durable, corrosion-resistant polyethylene and has a large anti-flotation flange to lock the basin into the floor slab. The octagonal design provides multiple locations for weeping tile inlets and adds structure. The sealed lid is made of high density polyethylene (HDPE) and includes a neoprene gasket. The cord and discharge pipe holes are precut in the lid and the grommets to seal the holes are supplied. The hardware is stainless steel.

View Details

Everbilt 1/3 HP Reinforced Thermoplastic Pedestal Pump

The 1/3HP pedestal sump pump manufactured of corrosive resistant thermoplastic materials will discharge up to 3,000 gallons per hour of water. It includes an adjustable vertical on/off switch. It is driven by an air cooled 115V motor.

View Details