MAKITA 5-inch Double Row Segmented Rim Diamond Cup Wheel

MAKITA 5-Inch Thin Kerf Cut Off Wheel

Optimize your metal cutting work with the Makita Premier 5 Cutting Wheel for Metal and Stainless Steel such as rebar, steel pipe, structural & galvanized steel, sheet metal, structural tubing, black steel, cable and small to medium diameter solid pieces. When cutting, consider applying the proper amount of pressure at a 90 degree angle to allow the cutting wheel to do the work. For best results, consider not pushing too hard on the wheel, which can cause the grinder to stall or kick back or give a less efficient cutting action, while also increasing the chances of slippage or loss of control of the tool, resulting in injury or damage. Applying light to moderate pressure and consistent movement will provide the most efficient cut and minimize heat build-up. Consider using light pressure and a consistent motion throughout the cut for the fastest cut-rate and prolonged wheel life. Excessive pressure through the cut causes increased friction and heat build-up, which can cause increased heat discoloration of the work piece and reduced wheel life. For demanding applications, higher amperage &/or torque angle grinders provide easier, long-lasting & efficient cuts

Dremel Diamond Surface Perp Wheel

Use your Dremel Ultra-Saw for concrete, masonry and tile surface preparation. The US410 diamond surface prep wheel uses patented diamond embedding technology to quickly smooth bumps and cracks in concrete before finishing and to remove thinset mortar for tile remodelling. Four-inch diameter wheel.

MAKITA 5 inch Ultra-Thin Kerf Cut Off Wheels (Flat With Depressed Centre)

Ultra-thin kerf design reduces friction for faster, cooler cutting and is ideal for use with cordless angle grinders, Ultra-thin kerf design drastically reduces material waste and harmful airborne contaminants, Burr free cutting eliminates follow up grinding or de-burring, Ideal for use with threaded rod, rebar, thin gauge sheet material, HVAC ducting, auto body repair and more!, ALWAYS USE WITH PROPER CUT OFF WHEEL GUARD FOR MAXIMUM OPERATOR SAFETY

MAKITA 14-inch x 1/8-inch x 1-inch Cut-Off Wheel, 5-Pack

The Makita 14-inch x 1/8-inch Cut-Off Wheel is the perfect cutting solution for steel studs and ferrous metals. The A36P-BF (Brown Fused Aluminum Oxide, 36 Grit, "P" Hardness) provides straight cuts while the Thin-Kerf design minimizes material loss resulting in reduced drag on the motor. Designed for use with Makita Chop Saws (sold seperately).