Milwaukee Tool MX FUEL High Cycle Concrete Vibrator 32' Whip w/ 2.25" Head

Model # 48-37-3222H|Store SKU # 1001873626

Overview

Model # 48-37-3222H Store SKU # 1001873626

The MILWAUKEE MX FUEL High Cycle Concrete Vibrator Whips with Heads are designed to provide the most powerful, most consistent consolidation and to be used with the MX FUEL High Cycle Concrete Vibrators. MX FUEL High Cycle Concrete Vibrator Whips with Heads are available in 7', 16', and 32' lengths and 1.75" & 2.25" head sizes.

32' Whip Length, 2.25" Head Diameter

For Use With MX FUEL High Cycle Concrete Vibrator

Tool Free Connector

1 Year Limited Warranty on Manufacturer's Defect

Most powerful, most consistent consolidation

Equipment redefined, trade focused, system wide

Manual

p_1001873626_alt_Complete Milwaukee Warranty EN_FR

The Home Depot will provide an accessible format of PDFs upon request. Please contact us at
1-800-628-0525.

Specifications

Dimensions

Assembled Depth (in inches): 384
Assembled Height (in inches): 2.3
Assembled Weight (in lbs): 34.3
Assembled Width (in inches): 2.25
Packaged Depth (in inches): 27.56
Packaged Height (in inches): 4.33
Packaged Weight (In lbs): 39.24
Packaged Width (in inches): 29.25

Details

Accessory Type: Hose
Country of Origin: MX-Mexico
Handheld or Stationary: Handheld
Individual/Set: Individual
Material Application: Concrete
Number of Pieces in Set: 1
Power Tool Accessory Features: Light Weight
Power Tool Accessory Type: Hose
Shank Type: Keyless

Warranty / Certifications

1 year limited warranty. For more information please call 1-877-948-2360.

Related Products

Milwaukee Tool M12 FUEL 1/4 -inch High Speed Ratchet Tall Shift Knob Assembly

The Milwaukee 1/4 -inch High Speed Ratchet Tall Shift Knob Assembly (49-06-2566) can replace the original anvil assembly on the M12 FUEL 1/4 -inch High Speed Ratchet (2566-20) for easier change of direction. The premium design offers users greater durability. Tools required for assembly (not included): snap ring pliers and a flat head screwdriver. Instructions for installation included.

View Details

Milwaukee Tool MX FUEL Core Rig Vacuum Pad

The MILWAUKEE Vacuum Pad provides users the ability to core without the use of anchors by securing their MX FUEL Core Rig w/ Stand (MXF302-2HD) to the floor with a vacuum pump. The Vacuum Pad comes with an inlaid pressure gauge, bubble level, and (4) leveling bolts to ensure users core rigs are securely suctioned onto the ground, providing peace of mind and productivity while coring up to a maximum of 14 bits. When moving on to the next core, users can pull on the pressure release onboard the pad and lift it from the handles on either side to quickly continue working. The Vacuum Pad is also compatible with coring stands 4115, 4120, 4130, and 3302 and is best used with Milwaukee's Vacuum Pump (49-50-0200).

View Details

Milwaukee Tool M18 FUEL Li-Ion Brushless Cordless 1/2 in. High Torque Impact Wrench w/ Pin Detent Protective Boot

Our Milwaukee protective boot is for use with the M18 FUEL 1/2" High Torque Impact Wrench w/ Pin Detent (2966-20) only. This product provides a lightweight, durable solution that is meant to protect the tool and work surface. The durable rubber design will withstand corrosive materials commonly found in transportation maintenance environments. Not for use on or near live electrical circuits. Use on any other product may result in damage to tool motor and may void tool warranty.

View Details

Milwaukee Tool MX FUEL 2" Concrete Vibrator Short Head

The MILWAUKEE 2" Concrete Vibrator Short Head is designed to produce high amplitude vibrations to remove air pockets from the concrete and evenly distribute an aggregate, resulting in higher quality concrete. The Short Head can be fully submerged during flatwork preventing excess splashing. In addition, the Short Head allows you to get into hard-to-reach locations. The Concrete Vibrator Short Head is for use with the MX FUEL Backpack Concrete Vibrator or MX FUEL Concrete Vibrator and is available in 1.25" and 2" sizes.

View Details