MOEN Universal Fill Valve

Model # M5350K|Store SKU # 1000514838

Overview

Model # M5350K Store SKU # 1000514838

Fill valves fill and maintain water levels in a toilet tank to ensure proper toilet function. Fill valves are easy to replace and can help save on costly renovations

Universal Fit-All. Your best choice if you are unsure of correct fit

Easy to install

Replaces fill valve, arm and float

Anti-siphon design

Quick water fill

Float can be easily adjusted for correct water level

Patented float design for the best function and seal

Silicone cone shank gasket material is longer lasting than standard material

Height adjust from 8-1/2 inch to 13 inch to fit most toilet tanks

cUpc certified

Manual

Warranty Details-pdf.pdf

The Home Depot will provide an accessible format of PDFs upon request. Please contact us at
1-800-628-0525.

Specifications

Colour/Finish Family

Grey

Plumbing Part Type

Toilet Fill Valve

Material

Plastic

Dimensions

Assembled Depth (in inches): 3.13
Assembled Height (in inches): 13.47
Assembled Weight (in lbs): 0.72
Assembled Width (in inches): 4.07
Packaged Depth (in inches): 3.1
Packaged Height (in inches): 11.7
Packaged Weight (In lbs): 0.726
Packaged Width (in inches): 4

Details

Colour/Finish Family: Grey
Material: Plastic
Plumbing Part Type: Toilet Fill Valve

Warranty / Certifications

Moen will replace FREE OF CHARGE any part or finish that proves defective in material and manufacturing workmanship, under normal installation, use and service. Replacement parts may be obtained by calling 1-800-465-6130. Proof of purchase (original sales receipt) from the original consumer purchaser must accompany all warranty claims. Defects or damage caused by the use of other than genuine Moen parts is not covered by this warranty. Please see the "Warranty Details" PDF attached above for further information

Related Products

BrassCraft Straight Valve 1/2 Inch Nominal Crimp Pex Barb X 3/8 Inch Od Compression

BrassCraft multi-turn straight valve controls water flow to household plumbing fixtures - faucets, toilets, dishwashers, icemakers, washing machines, etc. The straight valve is most often used where the water pipe enters the room from the floor. With a fe

View Details

PULSE ShowerSpas Tru-Temp Pressure Balance 1/2-inch Rough-In Valve With Oil Rubbed Bronze Trim Kit

PULSE ShowerSpas introduces their Pressure Balance Rough-In Valve with Brushed-Nickel Trim Kit! This valve utilizes a pressure balancing mixing cartridge to ensure constant water temperature in response to changes in water pressure (e.g. flushing a toilet). The valve also comes equipped with an adjustable Hot Limit Safety Stop to reduce risk of scalding. The Brushed-Nickel finish pairs beautifully with the Kauai ShowerSpa. The Plaster Guard is to be used as a guide during installation.

View Details

KOHLER MasterShower 1/2-inch Thermostatic Valve

Take showering beyond the ordinary with this 1/2-inch MasterShower thermostatic valve. When paired with compatible trim, this valve delivers a high-temperature limit stop for added safety and a high-flow rate for precise, consistent temperature control. High-temperature safety stop ensures water temperature stays below 120 F.

View Details

Cash Acme 1/2 inch HG-110 PEX Barb Thermostatic Mixing Valve

The Cash Acme- HG110 D, a triple-listed thermostatic mixing valve, delivers water at a safe 120°F (49°C) or lower from all outlets, while allowing the water heater to be set at a germ-killing 140°F (60°C) or higher which aids in preventing the growth of legionella bacteria in the water heater. The higher tank temperature means that hot water demands can be satisfied longer. Robust, low complexity construction. Every valve is tested for performance prior to shipping. Adjustable and lockable mechanism minimizes unauthorized tampering with valve setting. Each valve is factory set and locked to a maximum 120°F (49°C). Adj. outlet temperature range: 85-130°F (29-54°C)

View Details