Multinautic Dock Connector Hinge ½ in. pin. 5 in. x 5 in. x 1/8 in. - thick Hot dip Galvanised Steel

Dock connector hinge for wood dock is perfect to attach 2 stationary docks together. Made from 1/8 in. thick Hot Dip Galvanised steel. Hinge measures 5 in. x 5 in. Pin is ½ in. thick to provide years of use and resist wear and tear.

Multinautic Inside Dock Corner with Chain Holder Heavy Duty 5 in. x 5 in. x ¼ in. Hot dip Galvanised Steel

Heavy Duty Inside dock corner with chain holder for wood docks. Made from ¼ in. thick Hot Dip Galvanised steel, this corner has an integrated chain holder for anchor weights. Adjust the length of your anchor chain by lodging the chain link into the holder. Specifically designed for floating wood docks which require weights at the corners to keep them in place and stable. This dock corner is to be installed on the inside corner of your dock. Measures 5 in. x 5 in. that is ¼ in. thick.

Multinautic Anchor Chain Hooks Kit 2-Pack with 1/2-inch T-Bolts for Aluminum Docks

An aluminum floating dock layout absolutely requires an anchoring system at the end of the dock and at every 30 ft. of the floating section. It is the concrete anchoring blocks that will keep the docks in place under wave movements. This essential kit will prevent the dock from moving up and down, and laterally. Anchoring chain retainers are required on both end corners of the dock and in the 4 corners of the floating dock section where the boats are usually moored. This kit is designed for the QPF-500 dock system, but this system can be bolted to the underside of other models if they can be drilled to accommodate the 1/2" bolts.

Multinautic Heavy Duty Floating Dock Inside Corner Kit

This Heavy-Duty Floating Dock Inside Corner Kit is used to secure the corners of your dock together. It includes the matching components needed to build, repair or upgrade a dock system. It is used in the back of corner, pile guide, leg holder, or a connector hinge to reduce stress from bolts.