Oatey 4 inch Aluminum Roof Flashing

Black Knight 4 kg Wet/Dry Roof Repair

Especially formulated to provide excellent adhesion to wet or frozen surfaces. Heavy bodied trowel grade. If kept warm prior to use can be used to -25C. Water displacing formulation. Use to adhere loose shingles, repair leaky flashings, repair minor holes to 6mm (1/4"). For larger holes use Yellow Jacket imbedded in Wet/Dry Roof Repair

LeakSeal 6 inch Universal Patching Fabric

Rust-Oleum LeakSeal 6 inch Universal Patching Fabric is a non-shrinking, non-rotting, vinyl coating, woven glass mesh. It can conform to irregular surfaces because of its high degree of flexibility.

LeakSeal 6 inch Foundation Membrane

Rust-Oleum LeakSeal 6in Foundation Membrane is an impermeable, self- adhered sheet designed to be applied to exterior cavity walls to mitigate air infiltration/exfiltration, vapour transmission and water penetration.

WarmlyYours 3 Ft Pipe Heating Cable Kit Plug_In 120V

A burst water pipe in the dead of winter can be a huge inconvenience and completely replacing the insulation needed to prevent pipes in perimeter walls and crawlspaces from freezing can be cost-prohibitive. To keep your most vulnerable pipes from freezing, the simple and DIY-friendly solution is to install a PRO-Tect heating cable for pipes. This 120 V plug-in heating cable generates heat (7 watts per linear foot) which will keep your pipes from freezing in low temperatures. The integrated thermostat control, located between the non-heating lead cable and the heating wire itself, will ensure a consistent temperature while minimizing energy use. The thermostat turns the heating cable on when exposed to temperatures below 37.4°F (3°C). It will shut the heating cable off when the pipe has been heated to a temperature of approximately 50°F (10°C). The cable is covered by a 2-year warranty.