Onsen 3.0 Diaphragm RV / Marine 12V Water Pump

Model # ON-DP-30|Store SKU # 1001542712

Overview

Model # ON-DP-30 Store SKU # 1001542712

The Onsen 3.0 Diaphragm RV / Marine 12V Water Pump is designed to bring water pressure to cabins, boats, RV fixtures and tankless water heaters. Featuring noise absorbing mounts for quiet operation and factory calibrated for seamless installation with portable tankless water heaters such as the Onsen 6L and 10L, the 3.0 GPM, 12V Onsen pump is an integral part of any off-grid water installation.

3.0 GPM, 55 PSI, 12 Volts, 7.5 Amps

Built-in pressure switch (pump turns on when tap is opened and off when closed)

Self-priming

Ability to run dry without damage

Snap-in port fittings

Includes filter with 40 mesh stainless steel screen

Manual

Onsen_Pompe_low_res-pdf.pdf

The Home Depot will provide an accessible format of PDFs upon request. Please contact us at
1-800-628-0525.

Specifications

Dimensions

Assembled Depth (in inches): 4.5
Assembled Height (in inches): 4.25
Assembled Weight (in lbs): 4.18
Assembled Width (in inches): 8.5
Packaged Depth (in inches): 12.5
Packaged Height (in inches): 4.5
Packaged Weight (In lbs): 5
Packaged Width (in inches): 5.5

Details

Certified: No

Warranty / Certifications

2 years limited

Related Products

RINNAI 229013NPP 21inch condensing Horizontal Termination Kit by Rinnai for Tankless Water Heater

This 2 to 4-in Rinnai condensing termination kit measures 21-in and is intended for Rinnai tankless water heathers. Precisely engineered accessories can add even more reliability, convenience and flexibility to Rinnai Tankless Water Heaters. With Rinnai Common Venting, up to 8 tankless water heater units share the same vent system. This allows for significantly fewer wall or roof cuts, less labor, and longer vent lengths than ever possible with single-unit tankless water heater venting.

View Details

Z-Flex Z-Vent 3 inch.Diameter 90° Elbow

3 inch. x 90 degree stainless steel category II/III elbow for use when a direction change or offset is required. Features gasketed connections for a seamless and easy installation. UL approved and rated for category II/III heating equipment. Angle can be adjusted.

View Details

Z-Flex Z-Vent 3 inch. Diameter Single Wall Pipe (3 ft)

Available in lengths of 1ft. to 5ft. Ideal for adding pipe length to the Z-Vent 3 inch. Horizontal Vent Kit and Z-Vent 3 inch. Vertical Vent Kit. Built with a simple gasketed connection, the Z-vent pipe requires no sealant and features the highest pressure rating in the industry. It is the only metallic special gas vent that can be cut to length on site.

View Details

Oatey 24 inch Alum Water Heater Pan

Oatey Aluminum Water Heater Pans can be installed under gas or electric water heaters to protect from water damage. Available with 1" PVC, 1-½" PVC or 1" CPVC drain fittings to allow for connection to indirect drain

View Details