Orbit Watermaster 1/2 In. Barb Tee

Made of durable high-impact plastic to ensure long life, these fittings have sharp spiral barbs that eliminate the need for glue and clamps. Quickly and simply insert the fittings by hand into 1/2 in. riser flex pipe, and you are done!

RAIN BIRD 1/4" Barbed Tee (100 pack)

This barbed Tee fitting quickly connects three pieces of 1/4" drip irrigation tubing in a "T" shape or taps into the side of 1/2" or larger Drip irrigation tubing. Accepts all sizes of 1/4" Drip tubing and provides a durable, leak-tight connection. Unique barb design reduces insertion force. To extend water flow to individual plants: connect 1/4" Drip tubing to one end and insert self-piercing barbed end into 1/2" diameter or larger Drip tubing. Constructed of highly durable UV and chemical-resistant materials to assure long life. May be used above or below ground. Simple to insert by hand or use one of Rain Birds insertion tools (sold separately) for faster installation in larger projects. Designed for working pressure of 0-50 PSI. Rain Bird The Intelligent Use of Water.

Orbit 2-Port Full-Flow Inline Drip-Lock Manifold

Introducing the easiest to use microirrigation manifold on the market. The manifold system is expandable to any length using the two port manifold extension. DripLock is compatible with tubing from 16mm (0.630 inches) to 18mm (0.710 inches). The fittings are easy to remove and reuse and can rotate making it easy to position where needed. DripLock is up to 60% faster to install or replace than traditional microirrigation fittings.

RAIN BIRD 1/2" Riser Adapter with 1/4" Barb

Add 1/4 in. drip tubing from the side port of this unique adapter while keeping your sprinkler head or shrub spray in operation. Install it between the 1/2 in. riser and the spray device. Then simply connect 1/4 in. drip tubing to place drippers, bubblers, micro sprays or emitter tubing near other plants you wish to cover with low volume watering.