Carriage Bolts are mostly used in wood or metal to wood applications with a domed top and a square body under the head. This square body pulls into the wood as the nut is tightened. When using carriage bolts always use a flat washer between the wood and hex nut to eliminate pull-through of the nut in the wood. Drill pilot hole slightly larger than body diameter of bolt. Insert the carriage bolt so the headed end is on finished side of project for appearance or safety. Length is measured from under head to end of bolt. Use hot dipped galvanized finish or stainless steel where corrorsion is and rust is of concern or for exterior applications. Hot dipped galvanized finish provides one of the highest degree of corrosion resistance when compared to a steel zinc finish. Ideal for outdoor projects such as decks, fences, wood structures and with treated lumber installations.

Diameter: 3/8 inch

Length: 10 inch

Thread Type: UNC

Head Type: Round

Metal/Strength: Grade 2

Finish: Hot Dipped Galvanized

In select stores available in packs of 10

Specifications

Dimensions

Packaged Depth (in inches): 13.5
Packaged Height (in inches): 3.5
Packaged Weight (In lbs): 3.31
Packaged Width (in inches): 4

Details

Finish: Zinc Coated
Head Style: Round
Length (in.): 10
Material: Steel
Package Quantity: 1
Plating
Product Diameter: 3/8 in.
Product Finish/Material: Hot Dipped Galvanized
Product Length: 10 in.
Type: Standard

Warranty / Certifications

Call 1-800-268-4000

Related Products

Paulin 5/8-inch x 4-inch Grade 2 Hex Head Cap Screw- Coarse Thread, 1pc

Paulin's Hex Head Cap Screws are ideal fasteners where greater torque is required. These screws have tighter tolerances, a chamfered end and a washer face under the bolt head. Made from Grade 2 low carbon steel, these screws are recommended for non-critical applications only. Zinc plating provides moderate corrosion resistance.

View Details

Paulin 1/4X2 EXTERIOR BLACK HEX LAG BOLT

Recommended for all types of wood or metal to wood construction where standard wood or deck screws or nails are too short or light. Used in concrete with Lag Shields.

View Details

Paulin 1/4-inch x 2-1/2-inch Carriage Bolt Car Shelter Kit with Drive Bit - 150pcs

The car shelter provides mounting hardware for general wood contstruction and outdoor furniture. This kit is ideal for a car shelter structure - keep your car shelter safely secured to the ground.

View Details

Paulin 1/4-20 x 2-inch Hex Drive Connector Bolt Brass Plated

Joint Connector Bolts are designed to connect furniture or woodworking components at right angles or parallel. Ideal for all Knock-Down or Ready-to-Assemble Furniture. Used with Cap Nuts, Inserts, cross dowels or tee nuts. Low profile, large diameter, hex drive head. Brass plated is more economical than solid brass and is purely a decorative finish to match most hardware or wood used in Knock-Down or Ready-to-Assemble Furniture projects.

View Details