Paulin 5/16-inch Fender Washer, Zinc-Plated, 200pcs

Paulin 3/8-inch Fender Washers - Zinc Plated

Fender Washers are used under the head a a nut or bolt to distribute the forces applied when tightening. Fender washers have a large outside diameter. They are the ideal solution for covering oversized or odd-shaped holes to prevent pull-through and are ideal to use with thin sheet metal. Fender washers can also protect the surrounding surface area. Designed for interior and exterior projects, sheet metal work, plumbing, electrical applications and auto body repair. The larger surface area offers a thinner body for strong, durable performance for all projects.

Dock Edge Boat Shield, 48", Grey

"Boat Shield, 48"", Grey"

Paulin 5/16-inch Fender Washers, Zinc Plated - 6 pcs.

Paulin Fender Washers are designed to be used under the head of a nut or bolt to distribute the forces applied when tightening. This washer has thinner body and an increased outer diameter and ideal for auto body repair, sheet metal work, plumbing and electrical applications.

Paulin 5/16 x 1-1/2-inch Hex Head Lag Bolt - Zinc Plated

Lag Bolts are also called Lag Screws and are recommended for all types of wood or metal to wood construction where standard wood or deck screws are too short or light and where nails or spikes lack sufficient strength. They can be installed in wood with pre-drilled pilot holes or in masonry with Lag Shields. In wood to wood applications the non-threaded shank allows the second piece to be drawn tightly to the first piece of wood. Flat or fender washers are suggested to provide a larger bearing surface and to prevent the head of the lag bolt from imbedding in the first piece of wood. Steel is zinc plated for moderate protection against rust. Use hot dipped galvanized finish or stainless steel where corrorsion and rust is of concern or in exterior projects.