Ramset Drive Pin: 1" Drive Pin with Washer (100-Pack)

Paulin 1/8 x 2-inch Cotter Pin - 18.8 Stainless Steel

Cotter pins commonly used to secure two items together through a drilled hole. To use, place the cotter pin in the pre-drilled and the bulbous head will stop the pin from moving all the way through. Then, bend the open tips in opposing directions to secure in place. Use stainless steel where corrorsion is and rust is of concern or in exterior applications. Best for general hardware use or where high strength is not required.

DEWALT DW 300 HD 2 5 IN STD DR PIN 25PC

Drive pins with a 0.300-inch diameter head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572 / A992 structural steel. The fasteners are manufactured with a 0.145-inch diameter shank in various lengths. Knurled shank designs are available for installations in thick steel base materials. A plastic flute is mounted on the pin shank to retain the drive pin in the barrel of the tool and provide guidance during the driving operation. The fasteners are also available in with a mechanically galvanized (MG) coating for use in treated lumber.

Onward 7 1/2-inch (190 mm) High Strength Hitch Pin with 1-inch (25.4 mm) Pin Diameter

Hitch pin has a black powder coated pin with a red vinyl coated head, made from high strength steel and is heat treated. Used for pulling slightly heavier loads that require more than a standard Grade 2 pin. Provides durability and reliability for all your farm, ranch, and home and garden needs.

Onward 12-inch (305 mm) High Strength Hitch Pin with 1 1/8-inch (28.6 mm) Pin Diameter

Hitch pin has a black powder coated pin with a red vinyl coated head, made from high strength steel and is heat treated. Used for pulling slightly heavier loads that require more than a standard Grade 2 pin. Provides durability and reliability for all your farm, ranch, and home and garden needs.