Stone Mason Non-Shrink Grout

Custom Building Products SimpleGrout #333 Alabaster 1 Gal. Pre-Mixed Grout

SimpleGrout Pre-Mixed grout is a no-mix, no-mess alternative to traditional grout. This sanded, shrink and crack-resistant formula is also resistant to common household stains. SimpleGrout Pre-Mixed grout is easy to use and ideal for grout restoration. For interior use only and suitable for wet areas such as tub surrounds, shower floors and shower walls (dry times will increase and vary). SimpleGrout can be used with ceramic, mosaic, quarry, porcelain and stone tile as well as granite.

Custom Building Products SimpleSet White 3-1/2 Gal. Pre-Mixed Thin-Set Mortar

SimpleSet pre-mixed thin-set mortar is a no-mix, no-mess alternative to traditional thin-set mortars . Recommended to bond porcelain, stone, marble, granite and ceramic or porcelain tile up to 8 in. x 8 in. (20 x 20 cm). Can be used with tile with one side up to 15 in. (38 cm), but dry time significantly increases. Call Technical Services at 800-272-8786 for more information. For interior wall and floor installations. Use white SimpleSet when installing lighter-color stone and tile. Exceeds ANSI A136.1 Type I

Custom Building Products SimpleGrout #381 Bright White 1 Gal. Pre-Mixed Grout

SimpleGrout Pre-Mixed grout is a no-mix, no-mess alternative to traditional grout. This sanded, shrink and crack-resistant formula is also resistant to common household stains. SimpleGrout Pre-Mixed grout is easy to use and ideal for grout restoration. For interior use only and suitable for wet areas such as tub surrounds, shower floors and shower walls (dry times will increase and vary). SimpleGrout can be used with ceramic, mosaic, quarry, porcelain and stone tile as well as granite.

Custom Building Products TileLab SurfaceGard Stone, Grout & Tile Sealer - Pint

SurfaceGard Stone, Grout & Tile Sealer provides unsurpassed, invisible protection for marble, stone, porcelain, quarry and Saltillo tile, grout, concrete and masonry. This long-lasting, water-based sealer actually repels dirt, oil and stains allowing easy clean-up. Use when maximum protection is required such as in food preparation areas, floors and other high traffic areas. Can also be used in place of a grout release prior to grouting to prevent grout staining and facilitate grout clean up. Low odour, pH neutral and non abrasive. Allows moisture vapour transmission. For interior and exterior use. TileLab Low VOC (Volatile Organic Compound) formulas help provide better indoor and outdoor air quality compared to similar traditional products. 33 grams of VOC per liter of material.