STZ Fitting Galvanized Iron Coupling 3/8 inch

Model # 311FCO-38|Store SKU # 1000126131

Overview

Model # 311FCO-38 Store SKU # 1000126131

The Aqua-Dynamic 3/8 in. x 3/8 in. malleable Iron FPT x FPT coupling is galvanized for protection against corrosion and each fitting is hydrostatically tested. Maximum working pressure of 150 PSI

Galvanized malleable iron construction

150 psi maximum working pressure

Galvanized for protection against corrosion

Compatible with galvanized steel pipe nipples and pipe

For use in drainage, pump and potable water applications

Specifications

Connection Method

Threaded

Fitting or Connector Type

Coupling

Application

Water Supply, Potable Water

Dimensions

Assembled Depth (in inches): 1.04
Assembled Height (in inches): 1.16
Assembled Weight (in lbs): 0.12
Assembled Width (in inches): 1.04
Packaged Depth (in inches): 1.25
Packaged Height (in inches): 1
Packaged Weight (In lbs): 0.17
Packaged Width (in inches): 1

Details

Application: Water Supply, Potable Water
Connection Method: Threaded
Fitting or Connector Type: Coupling
Fitting Size(in.): 3/4
Pack Size: 1
Use With: Waste Water

Warranty / Certifications

One year limited warranty. For any inquiries call 1-800-363-6240

Related Products

Pro-Connect SHIELDED COUPLING 2

The PRO-CONNECT 2" shield coupling is designed to connect 2" cast iron, plastic or steel pipe in drainage, waste and ventilation systems. Stainless steel shielded elastomeric gasket ensures the flexibility, durability and corrosion resistance of the coupling.

View Details

Sioux Chief 3/8 inch x 3/8 inch Flare Female Pipe Coupling

Lead-free brass flare fittings are economical, reusable and resistant to mechanical pullout. They are commonly used for gasoline, grease, oil, water, vacuum, air lines, L.P. and natural gas. In combination with forged nuts, they can be used for refrigeration, air conditioning and other applications involving hard to hold liquids and gases.

View Details

Sioux Chief 3/8 inch x 1/2 inch Lead-Free Brass Flare x FIP Coupling

Lead-free brass flare fittings are resistant to mechanical pullout. In combination with forged nuts (part 412, 413 or 413R) they can be used for refrigeration, air conditioning and other applications involving hard to hold liquids and gases. Lead-free brass is not more than a weighted average of 0.25% lead when used with respect to the wetted surfaces of pipes and pipe and plumbing fittings and fixtures.

View Details

SharkBite Straight Coupling - 1/2 In. x 3/8 In.

The SharkBite<sup></sup> push-fit fittings are the fastest, easiest way to join copper, CPVC, or PEX tubing in any combination. Each fitting increases ease of use while decreasing the time and effort needed to connect water distribution pipe. There is no glue, soldering or crimping needed. Simply cut your pipe, deburr, mark the pipe approximately 1 (for proper insertion depth), install pipe to proper depth and youre done.

View Details