Venmar Auxiliary Wall Control

Model # 204060R|Store SKU # 1001800660

Overview

Model # 204060R Store SKU # 1001800660

This auxiliary wall control 204060R is an exhaust push button for installation in a bathroom, a laundry room or a workshop.To quickly evacuate stale air, this add-on control turns the air exchanger to high speed for 20, 40 or 60 minutes.

Compatible with Venmar HRV110 and ERV130 whole-house air exchanger

Exhausts stale air, odors and humidity at max speed for 20, 40 or 60 minutes countdown

For installation in a bathroom, a laundry room or a workshop

4 wires installation required

Manual

p_1001800660_alt_Installation_Guide_204060R.pdf

The Home Depot will provide an accessible format of PDFs upon request. Please contact us at
1-800-628-0525.

Specifications

Dimensions

Assembled Depth (in inches): 1.0
Assembled Height (in inches): 4.5
Assembled Weight (in lbs): 0.02
Assembled Width (in inches): 2.75
Packaged Depth (in inches): 1.8
Packaged Height (in inches): 5
Packaged Weight (In lbs): 0.02
Packaged Width (in inches): 3.5

Details

Certified: No
Country of Origin: CN - China

Warranty / Certifications

1-year limited

Related Products

Dundas Jafine ProClean Lint Trap

Acts as a secondary lint trap for your electric clothes dryer

View Details

GAF Master Flow 4-inch Resin Circular Mini Wall Louver Soffit Vent in White (4-Pack)

The Master Flow High Impact Resin Circular Vent is an easy-to-install option for providing critical intake ventilation at hard to ventilate or other restricted areas. Product snaps into place. The one piece construction eliminates the need for screen.

View Details

GAF Master Flow Replacement Power Vent Motor for CEGV5 (Gable Vent) and CERV4 (Roof Vent)Series

The CPVM105 motor is the replacement motor for the GAF Master Flow Power Roof Vent (CERV4) and Power Gable Vents (CEGV5). This upgraded PSC (Permanent split capacitor) motor is easy to install with the power vent in place, no need to remove the power vent. Minimal tools needed for replacement.

View Details

GAF Cobra 10.5-inchx 20 ft. Exhaust Roof Ridge Vent Mesh Roll in Black- (Hand Nail Version)

When installed as part of a properly balanced attic ventilation system, GAF Cobra Exhaust Vent is a shingle-over exhaust vent installed at the roof ridge that helps exhaust excess heat and moisture from your attic. It comes on an easy-to-install flexible mesh roll and is hand nailable with no complicated fitting, wrapping, nail gun adapters, connectors, or end-plugs needed. Help protect your roof system from premature deterioration by installing a properly balanced attic ventilation system consisting of Cobra Exhaust Vent at the ridge and adequate intake ventilation at or near the soffit areas of your roof.

View Details