Viega ProPress 1 in. Press Copper Cap (5-Pack)

Model # 238021|Store SKU # 1001901619

Overview

Model # 238021 Store SKU # 1001901619

Securely cap copper tubes with the Viega ProPress 1 in. copper cap. Designed for use with ASTM B88 and B75 copper tubing, these caps feature a 1 in. press connection to seal tubing without soldering.Press connections make installing this cap quick and efficient. Unlike traditional pipe fittings, theres no need for calibration, flame or heavy equipment. Instead, Viega ProPress copper caps install in just four easy steps: cut the copper tube to length, remove any burrs and surface imperfections, measure and mark the fitting insertion depth, and use a press tool to connect the Viega ProPress cap for a secure connection. Smart Connect technology identifies unpressed connections during pressure testing to ensure proper connections the first time and eliminate callbacks. Approved to the most codes and standards of any other copper press fitting system (IPC, UPC and NSF included), and with more than 400 different fitting configurations to suit virtually any type of plumbing or HVAC job, Viega ProPress caps are the top choice of professionals around the globe.

Designed for use with 1-in. ASTM B88 and B75 tubing, not compatible with PEX

Compatible systems include potable water, hydronics and more

Installs in 7 seconds or less with a press tool - no flame, solder or flux required

Viega smart connect technology helps installers identify unpressed fittings

Press technology eliminates the need for burn permits or fire watch

Wet or dry connections allow quick repairs on existing systems

Specifications

Dimensions

Assembled Depth (in inches): 1.11
Assembled Height (in inches): 1.5
Assembled Weight (in lbs): 0.122
Assembled Width (in inches): 1.5
Packaged Depth (in inches): 1.11
Packaged Height (in inches): 1.5
Packaged Weight (In lbs): 0.122
Packaged Width (in inches): 1.5

Details

Application: Bidet, Floor, Hydroponics, Laundry/Utility, Bathroom Sink, Non Potable Water, Air, Shower
Certified: No
Connection Method: Press
Fitting or Connector Type: Cap
Fitting Size(in.): 1/2, 1
Pack Size: 5

Warranty / Certifications

50 year limited warranty

Related Products

Aqua-Dynamic Fitting Copper Pre-Soldered Cap 1/2 Inch

Aquadynamic 1/2 in. Pre- Soldered Copper Caps make soldering easy.They are used to permanently cap copper tubing in water supply piping.

View Details

Nibco Press tee 1/2 In., pack of 200

The Nibco Press System wrot copper tee features an inboard bead and EPDM O-ring. Simply applying pressure from a pressing tool tightens the O-ring onto the tube, ensuring a clean, watertight seal in seconds with no flame, solder or flux. The tee has press connections and allows for a connection to be made in a continuous pipeline and branch out to a different direction.

View Details

Nibco F x p 45 elbow 1 In., pack of 100

The Nibco Press System copper 45-degree fitting elbow features an inboard bead and EPDM O-ring. Simply applying pressure from a pressing tool tightens the O-ring onto the tube, ensuring a clean, watertight seal in seconds with no flame, solder or flux. The elbow has a male fitting end and a press connection. The fitting provides a method of changing the pipeline direction by 45 degrees between a press connection and a fitting connection which can either be soldered or pressed.

View Details

Watts Female Pipe Cap (1/4)

Watts offers a wide variety of pipe fitting and nipples. Nipples are available in a variety of lengths and thread sizes and fitting are offered in a number of configurations using both male and female pipe threads.

View Details