Watts 1/8 Inches FV-4M1 Auto Vent

Model # 950106|Store SKU # 1000102123

Overview

Model # 950106 Store SKU # 1000102123

1/8" FV-4M1 Auto Vent

Provides automatic air venting for hot or cold water distribution systems

Purges air that may be in the water system.

Max working temp: 240F Min Working Pressure: 1.45psi, Max Working Pressure 150psi

float is high temperature resistant polyethylene

suitable for use with glycol systems

Specifications

Dimensions

Assembled Depth (in inches): 1.6
Assembled Height (in inches): 2.75
Assembled Weight (in lbs): 0.32
Assembled Width (in inches): 1.6
Packaged Depth (in inches): 2.75
Packaged Height (in inches): 1.62
Packaged Weight (In lbs): 0.32
Packaged Width (in inches): 1.62

Details

Country of Origin: US - United States

Warranty / Certifications

Watts Water Technologies (Canada) Inc. ("the Company") warrants each product against defects in material and workmanship for a period of one year from the date of original shipment. In the event of such defects within the warranty period, the Company will, at its option, replace or recondition the product without charge. This shall constitute the exclusive remedy for breach of warranty, and the Company shall not be responsible for any incidental or consequential damages, including, without limitation, damages or other costs resulting from labor charges, delays, vandalism, negligence, fouling caused by foreign material, damage from adverse water conditions, chemicals, or any other circumstances over which the Company has no control. This warranty shall be invalidated by any abuse, misuse, misapplication or improper installation of the product. 1-888-208-8927

Related Products

Oatey 20 Dfu Sure Vent 1.5-2 Pvc

Oatey Sure-Vent 20 DFU Capacity Air Admittance Valve's one-way valve allows air to enter the plumbing drainage system when negative pressures develop in the piping system.

View Details

Z-Flex Z-Vent 2.5 inch. to 3 inch. Vent Adapter

This stainless steel adapter is compatible with some Paloma, Rheem, and Noritz heaters, as well as the Eccotemp FVI12 and i12 series. It converts the flue opening from 2.5 inch. to standard 3 inch. Z-Vent venting. Total item length is 6 inch.. Note that it may be necessary to purchase a straight pipe piece with backflow preventer to ensure that freezing air does not come back through the vent pipe.

View Details

Z-Flex Z-Vent 3 Inch Horizontal Drain Pipe

Category II/III/IV, stainless steel, 3 diameter, horizontal drain pipe used to evacuate condensation from tankless water heater venting systems. The integrated sealant makes it easy to connect to other Z-Vent components without the use of sealant.

View Details

Z-Flex Z-Vent 4 inch. Diameter Single Wall Pipe (4 ft)

Available in lengths of 1ft. to 5ft. Ideal for adding pipe length to the Z-Vent 4 inch. Horizontal Vent Kit and Z-Vent 4 inch. Vertical Vent Kit. Built with a simple gasketed connection, the Z-vent pipe requires no sealant and features the highest pressure rating in the industry. It is the only metallic special gas vent that can be cut to length on site.

View Details