Black Friday event is on now. Don't wait! Shop Event

Z-Flex Z-Vent 60 inch. Condensation Drain Tube Kit

Model # NE37026|Store SKU # 1001235242

Z-Flex Z-Vent 60 inch. Condensation Drain Tube Kit

Overview

Model # NE37026 Store SKU # 1001235242

60 inch. condensate tube made of 3/8 inch. (I.D.) high temperature silicon for tankless water heaters. For use in all vertical and horizontal installations that are more than 5 feet in total length. Includes gear clamp and cable tie.

1 x 60 condensate tube

2 x gear clamps

2 x cable ties

Specifications

Dimensions

Assembled Depth (in inches): 1
Assembled Height (in inches): 60
Assembled Weight (in lbs): 1
Assembled Width (in inches): 1
Packaged Depth (in inches): 6
Packaged Height (in inches): 8
Packaged Weight (In lbs): 1
Packaged Width (in inches): 8

Details

Country of Origin: CA-Canada

Warranty / Certifications

For more information please contact customer service at 1-800-628-0525

Related Searches

single wall pipe

z-flex 3 inch pipe

24 kw electric water heater

z-flex single wall pipe

Related Products

Onsen 26L Indoor Propane Tankless Water Heater 6.9 GPM 180K BTU (w/ 3 Inch Wall Vent Kit & Air Intake Kit)

Make the switch to tankless and enjoy endless hot water with the Onsen 26L Indoor Propane Tankless Water Heater!Fueled by propane, the Onsen 26L has an electronic ignition powered by a standard 120v outlet and activated by water pressure & flow, and features a direct vent system that pulls air from the outside, preventing loss of warm indoor air and allowing for installation in restricted spaces.Requiring less than 1 amp, the 26L is ideally suited for remote locations equipped with an off-grid solar system, but also powerful enough to supply a 2-bath family home, townhouse or cottage.For indoor use only. CSA Certified for the USA and Canada.NOT SUITABLE FOR HYDRONIC, CLOSED LOOP, RECIRCULATING OR FLOOR HEATING SYSTEMS.

Make the switch to tankless and enjoy endless hot water with the Onsen 26L Indoor Propane Tankless Water Heater!Fueled by propane, the Onsen 26L has an electronic ignition powered by a standard 120v outlet and activated by water pressure & flow, and features a direct vent system that pulls air from the outside, preventing loss of warm indoor air and allowing for installation in restricted spaces.Requiring less than 1 amp, the 26L is ideally suited for remote locations equipped with an off-grid solar system, but also powerful enough to supply a 2-bath family home, townhouse or cottage.For indoor use only. CSA Certified for the USA and Canada.NOT SUITABLE FOR HYDRONIC, CLOSED LOOP, RECIRCULATING OR FLOOR HEATING SYSTEMS.

Z-Flex Z-Vent 3 Inch Horizontal Drain Pipe

Category II/III/IV, stainless steel, 3 diameter, horizontal drain pipe used to evacuate condensation from tankless water heater venting systems. The integrated sealant makes it easy to connect to other Z-Vent components without the use of sealant.

Category II/III/IV, stainless steel, 3 diameter, horizontal drain pipe used to evacuate condensation from tankless water heater venting systems. The integrated sealant makes it easy to connect to other Z-Vent components without the use of sealant.

Eccotemp 3" Vertical Vent Kit

3" Single walled Vertical Stainless Steel Vent Kit for Eccotemp 20HI Series, 6GB and 6.5GB Builder Series Tankless Water Heaters. You may need to purchase additional Eccotemp straight pipe.

3" Single walled Vertical Stainless Steel Vent Kit for Eccotemp 20HI Series, 6GB and 6.5GB Builder Series Tankless Water Heaters. You may need to purchase additional Eccotemp straight pipe.

Eccotemp 4" Vertical Vent Kit

4" Vertical Stainless Steel Wall Hung Vent Kit for horizontal installation of Eccotemp 45HI, EL22i, and SH22-I whole home indoor tankless water heaters. You may need to purchase additional Eccotemp straight pipe.

4" Vertical Stainless Steel Wall Hung Vent Kit for horizontal installation of Eccotemp 45HI, EL22i, and SH22-I whole home indoor tankless water heaters. You may need to purchase additional Eccotemp straight pipe.

Z-Vent 60 inch. Condensation Drain Tube Kit Z-Flex Z-Vent 60 inch. Condensation Drain Tube Kit

Z-Flex Z-Vent 60 inch. Condensation Drain Tube Kit

60 inch. condensate tube made of 3/8 inch. (I.D.) high temperature silicon for tankless water heaters. For use in all vertical and horizontal installations that are more than 5 feet in total length. Includes gear clamp and cable tie.

Z-Flex

1001235242

CAD93.32024-11-15https://www.homedepot.ca/product/z-flex-z-vent-60-inch-condensation-drain-tube-kit/1001235242

The Home Depot Canada

00