Dock Edge Mooring Arms, 6 foot

Model # DE3036F|Store SKU # 1000837358

Overview

Model # DE3036F Store SKU # 1000837358

"Mooring Arms, 6 foot"

Mooring Arms retain your watercraft a safe and convenient distance away from the dock face to prevent damage from wind, wake and waves

These easy-to-install Mooring Arms apply vector based forces to the bow and stern allowing the watercraft to move freely with wave and water action while being securely held away from the dock face

Made in Canada using highly durable cross-wound fibreglass with stainless and galvanized steel cleats and mounting brackets

5000 lbs. weight capacity is ideal for any watercraft up to a mid size cruiser

Specifications

Duty Rating

Heavy

Material

Fiberglass

Dock Hardware Type

Hardware Kit

Product Size

6 ft.

Dimensions

Assembled Depth (in inches): 72.0
Assembled Height (in inches): 1.5
Assembled Weight (in lbs): 12.5
Assembled Width (in inches): 1.5
Packaged Depth (in inches): 12.5
Packaged Height (in inches): 5.5
Packaged Weight (In lbs): 5.5
Packaged Width (in inches): 76

Details

Country of Origin: CA - Canada
Dock Hardware Type: Hardware Kit
Duty Rating: Heavy
Material: Fiberglass
Product Size: 6 ft.

Warranty / Certifications

Related Products

Dock Edge Rolling Dock Wheel, 24in Foamed

Wheels are available in 18 or 24 diameters and up to 1500 lb. capacity per wheel. These tough, rigid wheels offer stress, crack and impact resistance. They roll easily over virtually any terrain and will not rust on the axle. Use for roll-in docks or boat lifts. All wheels accept a 1-7/8 O.D. Axle. See chart below for wheel capacity.

View Details

Dock Edge Dock Hinge 3/8in Hardware

"This patented, strength rated, innovative dock coupler system works for wood or aluminium docks. It allows you to easily connect dock sections using our simple hitch & hinge system."

View Details

Dock Edge Washer Plate, 6 inch, Gal, 3/16 inch, 9/16 inchPunch

Howell floating dock hardware engineered for use with our howell floats to engineer and build the dock of your dreams. This Universal washer plate features steel construction with hot dip galvanized finish. This 7 in x 2-1/2 in x 3/16 in plate has hole size of 9/16 inch

View Details

Dock Edge Mooring Snubber, 1/2 inch-3/4 inch, 14-18mm

For secure and cushioned mooring. Ideal for both motor and sailing boats. The forces the line is exposed to, are taken up by the elongation of the mooring snubber, reducing the shock load on the line as well as the boat's hardware.

View Details