Everbilt 5/16 x 5 x 2-in Square U Bolt in Zinc - 1pc

Paulin 3/16-in x 1-1/2-in Round Head Square Drive Stove Bolt With Nut, Zinc-Plated, 11pcs

Paulin's Stove Bolts are machine screws that include matching hex nuts. These are fully threaded screws designed be used to fasten metal to metal, metal to wood and other types of materials. These screws are ideal fasteners for applications that may require future disassembly. They are also ideal where secure clamping of the materials is required. Zinc plating provides moderate corrosion resistance.

Everbilt 3/16 x 3-1/2 x 1-3/8-in U Bolt in Zinc - 1pc

Evebilt's U-Bolts provide a method for anchoring pipe, conduit or tubing to a fixed surface. Two hex nuts and a plate are included for ease of installation. Ideal for automotive, plumbing, residential and industrial applications. Zinc finish provides moderate corrosion resistance.

Paulin 1/2 x 3-1/2-inch Carriage Bolt - Hot Dipped Galvanized - Grade 2 - UNC

Carriage Bolts are mostly used in wood or metal to wood applications with a domed top and a square body under the head. This square body pulls into the wood as the nut is tightened. When using carriage bolts always use a flat washer between the wood and hex nut to eliminate pull-through of the nut in the wood. Drill pilot hole slightly larger than body diameter of bolt. Insert the carriage bolt so the headed end is on finished side of project for appearance or safety. Length is measured from under head to end of bolt. Use hot dipped galvanized finish or stainless steel where corrorsion is and rust is of concern or for exterior applications. Hot dipped galvanized finish provides one of the highest degree of corrosion resistance when compared to a steel zinc finish. Ideal for outdoor projects such as decks, fences, wood structures and with treated lumber installations.

Paulin 3/8 x 2-inch Hex Head Lag Bolt - 18.8 Stainless Steel

Lag Bolts are also called Lag Screws and are recommended for all types of wood or metal to wood construction where standard wood or deck screws are too short or light and where nails or spikes lack sufficient strength. They can be installed in wood with pre-drilled pilot holes or in masonry with Lag Shields. In wood to wood applications the non-threaded shank allows the second piece to be drawn tightly to the first piece of wood. Flat or fender washers are suggested to provide a larger bearing surface and to prevent the head of the lag bolt from imbedding in the first piece of wood. Stainless 18.8 Steel provides one of the highest degree of corrosion resistance when compared to a steel zinc finish. Ideal for outdoor projects such as decks, fences, wood structures and with treated lumber installations.