Everbilt 5/16 x 5 x 2-in Square U Bolt in Zinc - 1pc

Paulin 3/8 x 2-inch Hex Head Lag Bolt - 18.8 Stainless Steel

Lag Bolts are also called Lag Screws and are recommended for all types of wood or metal to wood construction where standard wood or deck screws are too short or light and where nails or spikes lack sufficient strength. They can be installed in wood with pre-drilled pilot holes or in masonry with Lag Shields. In wood to wood applications the non-threaded shank allows the second piece to be drawn tightly to the first piece of wood. Flat or fender washers are suggested to provide a larger bearing surface and to prevent the head of the lag bolt from imbedding in the first piece of wood. Stainless 18.8 Steel provides one of the highest degree of corrosion resistance when compared to a steel zinc finish. Ideal for outdoor projects such as decks, fences, wood structures and with treated lumber installations.

Paulin 3/8-16 x 1-1/2-inch Carriage Bolt - 18.8 Stainless Steel - UNC

Carriage Bolts are mostly used in wood or metal to wood applications with a domed top and a square body under the head. This square body pulls into the wood as the nut is tightened. When using carriage bolts always use a flat washer between the wood and hex nut to eliminate pull-through of the nut in the wood. Drill pilot hole slightly larger than body diameter of bolt. Insert the carriage bolt so the headed end is on finished side of project for appearance or safety. Length is measured from under head to end of bolt. Use stainless steel where corrorsion is and rust is of concern or for exterior applications. 18.8 Stainless steel is an alloy steel that provides one of the highest degree of corrosion resistance when compared to a steel zinc finish. Ideal for outdoor projects such as decks, fences, wood structures and with treated lumber installations.

Everbilt 5/16 x 5-in Eye Bolt with Hex Nut in Zinc - 1pc

Everbilt's Eye Bolt with Hex Nut is designed to easily attach ropes or cables to surfaces like wood and metal. This bolt has a machine screw thread with a blunt end. Ideal for light-duty applications. Zinc plating provides moderate rust-resistance.

Red Head 1/2-inch x 6-inch Foundation Bolt with Nut and Washer - 10 Pack

Objects or structures may be connected to concrete using this 6 in. Galvanized Metal Anchor Bolt with Nut and Washer. The bolt is ideal for connecting a concrete foundation to a wall to improve its strength.