Multinautic Dock Leg Holder Kit

This Multinautic Dock Leg Holder Kit holds 1-11/16po. Galvanized Steel Posts on a Stationary Dock with the reinforcement plates included that are fixed to the corners of series 10000 or having holes at 3.5 po.center in center. This Kit includes (2x) Leg Holders 10005: 5po.x 5po. x 1/8po. for 1-11/16po. Leg Pile and (4x) Back Plates 10003: 2-1/2po. x 5po. x 1/8po.. This Dock Kit comes with 7/16po. holes. The reinforcement plate is used to distribute the pressure on the wood.

Dock Edge Stationary Dock Inside Corner Kit

Stationary Dock Inside Corner Kit

Playstar Commercial Grade Hinge Kit

Connect and remove dock sections quickly and easily with clevis and pin.

Multinautic Anchor Chain Hooks Kit 2-Pack with 1/2-inch T-Bolts for Aluminum Docks

An aluminum floating dock layout absolutely requires an anchoring system at the end of the dock and at every 30 ft. of the floating section. It is the concrete anchoring blocks that will keep the docks in place under wave movements. This essential kit will prevent the dock from moving up and down, and laterally. Anchoring chain retainers are required on both end corners of the dock and in the 4 corners of the floating dock section where the boats are usually moored. This kit is designed for the QPF-500 dock system, but this system can be bolted to the underside of other models if they can be drilled to accommodate the 1/2" bolts.