Multinautic Flip Up Mooring Kit

This Multinautic Mooring Kit includes two (2) 6 in. solid cast marine grade aluminum white Flip Up Cleats and four (4) marine grade, pre-spliced, double braided, 3/8 in. x 15 feet . white nylon Dock Lines. Designed to be low profile when not in use, your toes will be safe all summer! For boats up to 20 feet.

Patriot Docks Floating Hinge Kit

The Floating Hinge Kit is used between stationary and floating dock sections to allow freedom of movement at the joint. The kit includes four hinge pieces, a pair of clamps, and one 4 ft. x 1-1/4 inch i.d. schedule 40 aluminum pipe.

Multinautic Anchor Chain Hooks Kit 2-Pack with 1/2-inch T-Bolts for Aluminum Docks

An aluminum floating dock layout absolutely requires an anchoring system at the end of the dock and at every 30 ft. of the floating section. It is the concrete anchoring blocks that will keep the docks in place under wave movements. This essential kit will prevent the dock from moving up and down, and laterally. Anchoring chain retainers are required on both end corners of the dock and in the 4 corners of the floating dock section where the boats are usually moored. This kit is designed for the QPF-500 dock system, but this system can be bolted to the underside of other models if they can be drilled to accommodate the 1/2" bolts.

Multinautic Heavy Duty Floating Dock Inside Corner Kit

This Heavy-Duty Floating Dock Inside Corner Kit is used to secure the corners of your dock together. It includes the matching components needed to build, repair or upgrade a dock system. It is used in the back of corner, pile guide, leg holder, or a connector hinge to reduce stress from bolts.