Overview
Model # 1130905 Store SKU # 1000155125
FOAMULAR NGX Extruded Polystyrene Rigid Insulation, is a moisture-resistant, rigid foam insulation, which can be installed on the interior or exterior of walls, foundation walls and under concrete floor slabs. With a thermal resistance of R-5 per inch of thickness, it can reduce heating and cooling costs and increase the home's comfort. Lightweight, durable and impact-resistant, FOAMULAR NGX products are easy to handle and install, and made in Canada. Choose FOAMULAR NGX Rigid Insulation for your next renovation.
- Used for above/below grade exterior walls, basement interior walls or basement floor slab (Compressive strength: 20 psi).
- FOAMULAR NGX is not rated for STC (sound transmission) and does not have any soundproofing properties. Owens Corning PINK NEXT GEN QuietZone batt insulation (1000443630/1000414077) is a great option for acoustic applications.
- GREENGUARD Gold certified; contributes to indoor air quality and certified by Scientific Certification Systems (SCS) to contain a minimum of 20% recycled content.
- Only XPS with a limited lifetime warranty that guarantees a minimum 90% of R-value for the life of the product; see warranty for complete details.
- Excellent energy efficiency in the form of a high R-5 per inch; available in a wide choice of sizes, thicknesses and edges (shiplap or square edge).
- Lightweight, durable and moisture-resistant; easy to cut, score and install. Many installation questions can be answered by reviewing the Product and Installation Guide.
- FOAMULAR NGX insulation products can be used on wood, steel framing or concrete walls.
- FOAMULAR NGX is a combustible product and needs to be covered by a 15-minute thermal barrier such as 13 mm (1/2") drywall.
- FOAMULAR products can be used to insulate a floor, however the final flooring cannot be installed directly over the FOAMULAR. Apply a sub floor of either 19 mm (3/4") tongue and grove, or two layers of 11 mm (7/16") OSB with off-set seams.
- If being used for crafts, acrylic or latex based paints can be used with FOAMULAR products.
- If using caulk, use a premium acrylic caulk that does not harden when cured (remains pliable).
- Use only water-based adhesives, which contain no solvents, and are compatible with extruded polystyrene (XPS) rigid insulation boards