Paulin #6-inch Flat Washer - 18.8 Stainless Steel - 9pcs

Paulin #6 (1/8-inch B.S.) Steel S.A.E. Washers - Zinc Plated

S.A.E. Steel Washers are made from strip steel; have bright, smooth, flat surfaces; are highly polished and are free from burrs.

Paulin 1-inch Steel Spacer Washer

Commonly used on axles, and shafts to space between cotter pins, lock nuts, hitch pin clips and hitch pins or to take up slack between machinery parts. Minimizes wear due to slipping and vibration. Provides a tight fit.

Paulin 5/16-inch Plain Steel Washers - Zinc Plated - 1pc

Flat washers are great for adding resistance to your bolts and screws that will provide a greater bearing surface under the fastener to prevent them from boring into the surface and weakening it. Used behind a nut or screw head to distribute load and to prevent material from buckling or screw pull-through. Washer sizes are specified by the bolt or screw diameter and should be matched to ensure proper fit. Flat Washers are free from burrs and have smooth, flat surfaces. These washers are finished with a zinc finish and have good corrosion resistance.

Paulin 3/8-inch (7/8-inch O.D.) Flat Washer - 18.8 Stainless Steel

Flat washers are great for adding resistance to your bolts and screws that will provide a greater bearing surface under the fastener to prevent them from boring into the surface and weakening it. Used behind a nut or screw head to distribute load and to prevent material from buckling or screw pull-through. Washer sizes are specified by the bolt or screw diameter and should be matched to ensure proper fit. Flat washers also prevent loosening due to vibration and can act as spacers. Flat Washers are free from burrs and have smooth, flat surfaces. Use stainless steel where corrorsion is and rust is of concern or in exterior applications. Best for general hardware use or where high strength is not required.