Paulin 1/2 x 8-inch Carriage Bolt - Hot Dipped Galvanized - Grade 2 - UNC

Model # 853-603|Store SKU # 1000133390

Overview

Model # 853-603 Store SKU # 1000133390

Carriage Bolts are mostly used in wood or metal to wood applications with a domed top and a square body under the head. This square body pulls into the wood as the nut is tightened. When using carriage bolts always use a flat washer between the wood and hex nut to eliminate pull-through of the nut in the wood. Drill pilot hole slightly larger than body diameter of bolt. Insert the carriage bolt so the headed end is on finished side of project for appearance or safety. Length is measured from under head to end of bolt. Use hot dipped galvanized finish or stainless steel where corrorsion is and rust is of concern or for exterior applications. Hot dipped galvanized finish provides one of the highest degree of corrosion resistance when compared to a steel zinc finish. Ideal for outdoor projects such as decks, fences, wood structures and with treated lumber installations.

Diameter: 1/2 inch

Length: 8 inch

Thread Type: UNC

Head Type: Round

Metal/Strength: Grade 2

Finish: Hot Dipped Galvanized

Specifications

Dimensions

Assembled Depth (in inches): 0.5
Assembled Height (in inches): 8
Assembled Weight (in lbs): 0.46
Assembled Width (in inches): 0.5
Packaged Depth (in inches): 4.25
Packaged Height (in inches): 3
Packaged Weight (In lbs): 9.22
Packaged Width (in inches): 9

Details

Country of Origin: TW-Taiwan
Finish: Zinc Coated
Head Style: Round
Length (in.): 8
Material: Steel
Material: Galvanized Steel
Plating
Product Diameter: 1/2 in.
Product Finish/Material: Hot Dipped Galvanized
Product Length: 8 in.
Type: Standard

Warranty / Certifications

Call 1-800-268-4000

Related Products

Paulin 3/8 x 6-inch Carriage Bolt - Zinc Plated - Grade 2 - UNC

Carriage Bolts are used in wood or metal to wood applications with a domed top and a square under the head. This pulls into the wood as the nut is tightened. When using carriage bolts always use a flat washer between the wood and hex nut to eliminate pull-through of the nut in the wood. Drill pilot hole slightly larger than body diameter of bolt. Insert the carriage bolt so the headed end is on finished side of project for appearance or safety. Length is measured from under head to end of bolt. Steel is zinc plated for moderate protection against rust. Use hot dipped galvanized finish or stainless steel where corrorsion and rust is of concern or for exterior projects.

View Details