Le Vendredi fou est en cours. N’attendez pas!  Magasiner l’événement

Aperçu

Modèle # 2069 Internet # 1001513116

Une technologie respectueuse de lenvironnement à base de soya sert à coller les 5 plis de ce panneau pour projet en contreplaqué de chêne blanc PureBond, assurant des créations aussi durables que magnifiques. Le composé dadhérence sans formaldéhyde présente une plus grande tolérance à lhumidité que les panneaux chargés durée-formaldéhyde. La construction multicouche du panneau le rend moins vulnérable à la déformation que le bois massif. De plus, il ne libère pas de contaminants aériens dans votre espace intérieur au fil du temps, contrairement aux feuilles contenant de lurée-formaldéhyde, ce qui en fait une alternative économique vous préservant des émanations nocives. Chaque panneau de 1/2 po x 2 pi x 4 pi comporte des placages de chêne blanc coupés de façon durable dans du bois récolté au Canada, ce qui vous donne la tranquillité desprit dacheter un produit forestier respectueux de la Terre.

  1. Panneau pour projet 5 plis assemblé avec des placages frontal et dorsal de chêne blanc lisses et sans taches
  1. Le contreplaqué de bois dur purebond est une alternative écologique et économique aux panneaux fabriqués avec de lurée formaldéhyde (UF), pouvant dégrader la qualité de lair au fil du temps
  1. Contient du bois 100 % naturel collé avec un adhésif à base de soya de qualité alimentaire qui német pas de contaminants atmosphériques toxiques
  1. Moins susceptible de se déformer que le bois massif, la composition résistante à leau présente une plus grande tolérance à lhumidité que les panneaux en UF
  1. Offert en une variété dessences : aulne, cèdre, cerisier, hickory, acajou, érable, peuplier, chêne rouge et noyer

Spécifications

Dimensions

Hauteur assemblé (en pouces)
48
Hauteur de l’emballage (en pouces)
49
Largeur assemblée (en pouces)
24
Largeur de l’emballage (en pouces)
25
Poids assemblé (en livres)
10
Poids de l’emballage (en livres)
13
Profondeur assemblé (en pouces)
0.5
Profondeur de l’emballage (en pouces)
1

Détails

Caractéristiques du contreplaqué
Possibilité de teindre, Précoupé
Essences de bois
Chêne blanc
Ignifuge
Non
Pays d'origine
CA-Canada
Taille nominale l x L (pieds)
2 x 4
Épaisseur nominale (en pouces)
1/2

Garanties et certifications

Produit garanti contre les défauts liés au collage et à l'adhérence. Remplacement de produit assuré.
Contreplaqué de chêne blanc 1/2 po x 2 pi x 4 piColumbia Forest Products Contreplaqué de chêne blanc 1/2 po x 2 pi x 4 piUne technologie respectueuse de lenvironnement à base de soya sert à coller les 5 plis de ce panneau pour projet en contreplaqué de chêne blanc PureBond, assurant des créations aussi durables que magnifiques. Le composé dadhérence sans formaldéhyde présente une plus grande tolérance à lhumidité que les panneaux chargés durée-formaldéhyde. La construction multicouche du panneau le rend moins vulnérable à la déformation que le bois massif. De plus, il ne libère pas de contaminants aériens dans votre espace intérieur au fil du temps, contrairement aux feuilles contenant de lurée-formaldéhyde, ce qui en fait une alternative économique vous préservant des émanations nocives. Chaque panneau de 1/2 po x 2 pi x 4 pi comporte des placages de chêne blanc coupés de façon durable dans du bois récolté au Canada, ce qui vous donne la tranquillité desprit dacheter un produit forestier respectueux de la Terre.
Columbia Forest Products
1001513116
CAD43.992024-11-15
Home Depot Canada
Contreplaqué de chêne blanc 1/2 po x 2 pi x 4 pi est évalué 4.5 de 5 de 27.
  • y_2024, m_11, d_15, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_3, tr_24
  • loc_fr_CA, sid_1001513116, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 58ms
  • REVIEWS, PRODUCT
Rated 1 de 5 de par Poor quality item. Received my two 1/2'' x 2' x 4' panels today. Both had damage. The first one looks like someone dragged it across the stack of wood below it. Had a 23" rub mark across the grain. Back (B) has pits with black something in them. The second panel had delamination on A side. B side had same pits as 1st. panel. Home Depot couldn't reach Mr. Thomason on the phone at Columbia Forest Products, Vendor. Project date was promised by May 8th. I really dislike putting my name on the line when other people could care less about their product quality. Hmmm!
Date de publication: 2015-04-30
Rated 5 de 5 de par Great wood for making shelves I ordered several varieties of these plywood sheets to do different projects in my home. I used this one for a simple book shelf in my office. I only needed a small shelf for a few heavy hardcover books and this was the perfect thickness to give it strength. The wood veneer pattern on it naturally makes it look beautiful. It cuts easy, and I had no problem screwing brackets into it. The wood comes pre-sanded so you only have to touch up after your cuts. It takes stain evenly for a richer finish. I was very pleased with every one of these that I ordered and all my projects came out looking professionally done.
Date de publication: 2014-03-14
Rated 4 de 5 de par Attractive and useful [This review was collected as part of a promotion.] Years ago I used red oak plywood to make a floor to ceiling bookcase with very satisfactory results, but I seldom use plywood for making furniture. This panel is being used for its structural properties: plywood is much less prone to warping than solid wood, especially when humidity changes. However I couldn't help but notice the beautiful grain pattern. The veneer is applies in 4 inch strips, so the end result looks as though you glued together solid planks to make the board. If my wife notices it, I can see myself making a lot of furniture!
Date de publication: 2015-04-12
Rated 5 de 5 de par Good looking plywood [This review was collected as part of a promotion.] The major quality of this plywood is in its finish: the grains look and feel nice. The color is much more pale than on the picture, which gives to the panel kind of an "Arctic" feel. The veneer is nonetheless on the thin side. Despite the thin veneer, It is nonetheless easy get a clean cut: I got some very decent results with a Ryobi jigsaw and Bosch blades (Clean Woods). With half an inch thick, it is pretty solid - fine to walk on -, and can therefore be used in a wide range of applications.
Date de publication: 2016-03-27
Rated 5 de 5 de par I purchased this product to replace the White Oak for... I purchased this product to replace the White Oak for the end panel piece of our kitchen cabinets that had been damaged. This is the only place I was able to specifically order White Oak in all of my searching. I really didn't know what to expect but the piece was protected in cardboard shipping and beautiful and usable on both sides. It stained up really nice with natural gel coat. Prior to that, all I did was a very light sanding with #120. I was very happy with the price and the finished product from Columbia Forest Products.
Date de publication: 2019-04-23
Rated 5 de 5 de par Outstanding White Oak Project Panel [This review was collected as part of a promotion.] 1/2in. X 2ft. X 4ft. White Oak Plywood This white oak panel is simply outstanding!! The panel was well packaged and arrived in perfect condition. While I normally expect a few end voids even in really nice plywood I was unable to find any on this piece. I have never seen a four foot piece of ply that was any flatter than this or any nicer. I would feel comfortable using this for almost any project. This piece has a very nice grain to it and with the correct stain you could use it to imitate many different types of wood. While I am not a furniture maker or fine craftsman I still appreciate a really nice board, if you are looking for a piece of white oak I can not imagine you being unhappy with this. Pros: Flat Beautiful No end voids Cons: None
Date de publication: 2017-03-07
Rated 5 de 5 de par I have purchased this company's maple plywood before and was prepared to do a lot of prep before ... [This review was collected as part of a promotion.] I have purchased this company's maple plywood before and was prepared to do a lot of prep before finishing it. But to my surprise this plywood is already very smooth and requires very little sanding. I needed some shelves in my room to display some crafts and decided to try the oak plywood. Same high quality and nice grain. Finishes out very easily and looks high quality. Easy to work with and pleasing to look at.
Date de publication: 2017-07-26
Rated 5 de 5 de par Beautiful piece of plywood [This review was collected as part of a promotion.] This panel of plywood arrived in excellent condition and the wood grain is nice and straight. This appears to be oak on one side but something else entirely on the other side - more similar to maple or birch. Both sides are beautiful, but if you're looking for something oak on both sides this might not be it. I will definitely use the oak side for something, just have to figure what that might be.
Date de publication: 2017-06-25
  • y_2024, m_11, d_15, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_3, tr_24
  • loc_fr_CA, sid_1001513116, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 13ms
  • REVIEWS, PRODUCT

Which direction does the grain run? does it run parallel to the 4 foot length?

Which direction does the grain run? does it run parallel to the 4 foot length?
Posée par: John
Hello John, The grain runs in the 4 ft. direction on the 2 ft. x 4 ft. panel.
Répondue par: Columbia Forest Expert
Date de publication: 2023-05-04

Are both sides veneered with white oak or is there only "one good side"?

Posée par: andrewh
Hello, both sides are White Oak veneer. The face side will be the best appearance side.
Répondue par: CFP Customer Service
Date de publication: 2024-01-08

are both sides of the panels knot free on the surfaces?

are both sides of the panels knot free on the surfaces?
Posée par: dave
There should be no open knots on the surface, but could be some sound knots on the back.. Give me a call at 336-291-5869 so we can discuss the HPVA grades in more detail. Thanks -- Michael
Répondue par: CFP Customer Service
Date de publication: 2023-05-07

What is the best product to use on this panel to get a clear flat finish?

Posée par: Beck
Hi, I would recommend speaking with some pro desk members at your local Home Depot! They will know exactly what you need and what will be best for what you are trying to do. Thanks
Répondue par: CFP Customer Service
Date de publication: 2023-11-20

I have floating stairs and using square stair treads (Unfinished White Oak Retrofit) to modernize my stair. Can I use this 1/4 white oak panel to glue/nail at bottom of my floating stair? I will then sand and stain with my matching laminate floor color.

Posée par: Jumpdrive
Hi, I would not recommend for floor applications. The white oak veneer on the panel is thin and not designed to stand up to wear and tear of a floor application.
Répondue par: CFP Customer Service
Date de publication: 2023-09-08

this product at the bottom of the specs says it 9s available in all kinds of wood but there is no place to pick a different wood other than white oak... I would like it in red oak...

Posée par: jack
The other species can be found in the search results. I would recommend searching our brand name, Purebond, on the Home Depot site, which should bring up more of the offerings. If you would like me to share a link to a specific product page, you can email me at mhale@cfpwood.com. Thanks - Michael
Répondue par: CFP Customer Service
Date de publication: 2023-05-07

If I want to use this as a table top. Will the edges "look" finished? Or will I need to figure out how to make a box with it to truly finish the edges?

Posée par: Boymom
Hi Tammy, You would want to use something like trim lumber or edge banding to cover the plywood edge. The edge is not intended to be exposed.
Répondue par: CFP Customer Service
Date de publication: 2023-05-07
  • y_2024, m_11, d_15, h_7CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_7
  • loc_fr_CA, sid_1001513116, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 92ms
  • QUESTIONS, PRODUCT